Cuna colecho babybay

The sleeping platform is flat and height-adjustable up to 28 inches to align with the parent bed, with a 4-inch barrier, and nothing inclined, weighted or positioner-like is offered for use inside it — the accessories are sheets, pads, casters and conversion kits. Hands-on testing by an independent baby-gear outlet found the surface stable with no low points and the pad seated firmly on the slats, but also easy to compress and less supportive than some rivals, and the head-to-toe surface angle is not published as a figure.

The form factor is a bedside sleeper attaching to an adult bed, which falls under 16 CFR part 1222 with ASTM F2906. The compliance wording is general — all US ASTM and CPSC safety standards — and the US arm sells only configurations certified for US use, with the European mattress pads neither sold nor certified here. The applicable part is still not named and no certificate or compliance-label detail is shown.

A bedside sleeper that secures to an adult bed is governed in the US by 16 CFR part 1222, which incorporates ASTM F2906. This sleeper carries only a general compliance claim — all US ASTM and CPSC safety standards — with that governing rule left unnamed, and no Children's Product Certificate or accredited third-party lab report is published.

Hands-on testing by an independent baby-gear outlet scored this sleeper at the very top of its group for breathability, finding no fabric or other obstruction that could impede a baby's breathing, with wood-slat sides and a slatted floor whose open spaces increase air circulation; that testing comes from a single outlet. The frame is 100% European beechwood with no plywood, no engineered-wood panels and no plastic parts, so no CARB Phase 2 question arises, and no bumper, padded liner or slat cover is offered for this model.

This sleeper ships without a pad, so the chemistry sits with the pads sold separately for it: 2-inch foam cores stated to be 100% CFC-free and free of flame retardants, covers certified to OEKO-TEX STANDARD 100 Class 1 for babies under certificate 12.0.03346, and an organic option layering coconut coir, natural Dunlop latex and Merino wool in GOTS-certified organic cotton. Waterproofing is a polyurethane liner on cotton rather than PVC, and no fiberglass barrier is used. All three US foam pads use polyurethane foam, and the disclosure covers those companion pads rather than a pad supplied with the sleeper.

We queried the CPSC recall register — 9,944 records spanning June 1973 to August 2026 — and found a single entry connected to Babybay: a 2018 recall of Babynest crib bumpers sold on babybay.us, where over-long ties posed a strangulation hazard. Purchasers were contacted directly and offered a full refund, no injuries were reported, and the bedside sleeper itself has no recall record; the bumpers were a separate accessory and are no longer part of the range.

The mattress pads, covers and sheets sold for this sleeper carry OEKO-TEX STANDARD 100 Class 1 certification for babies, with certificate 12.0.03346 given for the Tranquility pad and the jersey sheet, and the organic pad adds GOTS-certified organic cotton. Those named, numbered certificates cover the textiles rather than the wooden bedside sleeper being scored, and the sleeper itself carries only a general claim of meeting US ASTM and CPSC safety standards, naming no specific standard, lab or certificate.

An independent bassinet-testing outlet that bought and evaluated the sleeper alongside 20 other models scored it among the very best in its lineup and specifically called out the eco-friendly materials, but it did not run or report a VOC/emissions lab measurement on the finished sleeper. The frame remains solid European beechwood with no plywood or particleboard, coated only with water-based, non-toxic, no- or low-VOC finishes, and no flame retardants are used anywhere in the build.

Materials are published component by component — 100% ethically-sourced European beechwood, no plywood, no plastic parts, water-based colour coatings or untreated raw wood, and minimal metal fittings tested for heavy metals — alongside manufacture in Germany and a 10-year warranty. The caveat is depth: the German factory itself is never named.

The build is disclosed component by component: 100% ethically-sourced European beechwood, no plywood, no plastic parts, untreated raw wood or water-based colour coatings, minimal metal fittings tested for dangerous materials and heavy metals including lead and cobalt, and no flame retardants. Dimensions, weight, weight capacity and the full box contents are listed alongside it.