Bento 3-in-1 Convertible Storage Crib with Toddler Bed Conversion Kit

The Bento is made of New Zealand pine wood, but the base board material used inside this specific model is not identified, and Babyletto's own materials page confirms MDF is used in some construction requiring CARB II compliance without specifying which components on this crib.

The Bento's finish is non-toxic, lead- and phthalate-safe, and formaldehyde levels test undetectable, though the specific water-based chemistry of the finish is stated by third parties rather than named explicitly as such on the product's own page.

The crib is built to ASTM F1169 and 16 CFR 1219, the standards governing full-size cribs, with slats tested to withstand 135 lbs against an 80 lb minimum, and sent to a third-party CPSC-certified lab for compliance testing.

We queried the CPSC recall register and found one open recall on record, for the Kiwi Electronic Recliner/Glider — a different product category (gliders, not cribs) than this crib. Babyletto issued that recall proactively with a free repair kit. No recall of any crib line surfaces anywhere in the record.

Babyletto names ASTM F1169 and 16 CFR 1219 as the governing standards for its full-size cribs, with slats rated to 135 lbs against an 80 lb minimum requirement and a maximum slat gap of 2 3/8 inches.

The finished crib line is GREENGUARD Gold certified, with independent lab and retailer listings repeating that certification without a licence number. JPMA/ASTM F1169-19 testing is documented, but for a sibling crib model rather than this one, so it doesn't add product-specific verification here.

Babyletto states its cribs carry GREENGUARD Gold certification for emissions, and a retailer support page confirms the brand's products undergo Greenguard testing. The independent lab result verifying this at the chemical level was run on a sibling dresser/crib model, not this Bento crib specifically.

The Bento's wood is FSC-certified and sourced from well-managed forests, but no FSC licence code is published to let a reader resolve the certification independently.

A retailer support page disclosed that Babyletto furniture is manufactured in Taiwan and China, a fact not stated on the brand's own compiled profile, and the brand separately publishes concrete 1-year warranty terms plus a replacement-parts program for cribs.

The crib is made of New Zealand pine wood, and where MDF appears elsewhere in Babyletto's furniture construction it uses only CARB II compliant materials, along with undetectable formaldehyde and lead-safe finishes.